
Gamepad tester: test your controller online
Press any button on your controller to watch every button, trigger and stick light up live, check the sticks for drift and try the vibration. It all runs in your browser, with no download or driver.
Controller test
Test your controller
Waiting for a controller
Press a button on your controller to start
Extra buttons
This controller reports no sticks.
The dashed ring. Set it to the dead zone of your game: a game ignores a resting stick that stays inside it. The solid ring and cross show the drift test result.
- Buttons tested
- 0 of 0
- Presses
- 0
- Last button
- –
- Page reads/s
- –
Page reads/s is how often this page checks your controller: once per frame of your screen, so never more than your frame rate, for example 60 on a 60 Hz screen. It isn't your controller's polling rate, and this page can't measure input lag.
All buttons workStick drift test
5 secondsPut the controller down and let go of both sticks, then start. After 1 second the test reads the sticks for 5 seconds and shows how far from the center they rest.
Results appear here: the max offset, resting position and noise of each stick, compared with your dead zone ring.
Left stick
– max offset
Right stick
– max offset
Vibration test
Not availableConnect a controller to test its vibration.
Raw values
| # | Button | Value | Presses |
|---|---|---|---|
| No controller yet | |||
| # | Axis | Value |
|---|---|---|
| No controller yet | ||
Your controller input stays in this tab and is never uploaded or saved. This page only remembers your dead zone setting and your Animations and theme choice in this browser.
How to test your controller
- Plug the controller in with a USB cable, or pair it over Bluetooth in your system settings.
- Press any button. The controller gets a tab, and every button, trigger and stick lights up on the drawing as you use it.
- Press each button once: Buttons tested counts the ones that work, and Raw values shows every value to four decimals.
- Let go of both sticks and run the drift test. Set the dashed ring to your game's dead zone to compare.
- Try the vibration buttons. To test another controller, connect it, press a button and switch with the tabs.
It works with any controller your device and browser recognize, for example Xbox, PlayStation DualSense and DualShock 4, Nintendo Switch Pro and 8BitDo controllers.
Advertisement
The standard controller layout
When your browser recognizes a controller, it maps it to the standard layout of the W3C Gamepad specification and reports the mapping as standard. The layout goes by position, not by the label printed on the button, so button 0 is always the bottom face button:
| Number | Position | Xbox | PlayStation | Switch Pro |
|---|---|---|---|---|
| 0 | Bottom face button | A | Cross | B |
| 1 | Right face button | B | Circle | A |
| 2 | Left face button | X | Square | Y |
| 3 | Top face button | Y | Triangle | X |
| 4, 5 | Left and right bumper | LB, RB | L1, R1 | L, R |
| 6, 7 | Left and right trigger, 0 to 1 | LT, RT | L2, R2 | ZL, ZR |
| 8, 9 | Left and right center button | View, Menu | Create or Share, Options | −, + |
| 10, 11 | Left and right stick pressed in | LS, RS | L3, R3 | Stick press |
| 12–15 | D-pad up, down, left, right | D-pad | D-pad | D-pad |
| 16 | Center logo or Home button | Xbox button | PS button | Home |
Axes 0 and 1 are the left stick and axes 2 and 3 the right stick, from −1 (left or up) to 1 (right or down). Some controllers report extra buttons after number 16. If the browser doesn't know a controller, it reports no mapping and passes the buttons and axes on in the device's own order. The drawing can't know which button is which then, so the tester shows numbered buttons and the raw values instead: press each button to find its number.
Stick drift and dead zones
Stick drift means a stick reports movement you aren't making: your character creeps or the camera turns by itself. Even a stick nobody touches rarely reads exactly 0, so games ignore a small area around the center, the dead zone. Microsoft's XInput guide says that resting movement varies from controller to controller and gives Windows game developers default dead zones of 7849 and 8689 out of 32767 for the left and right stick, about 24% and 27% of the way out.
There is no universal number that means drift. What counts is whether the resting offset is bigger than the dead zone of the game you play. Set the dashed ring to that dead zone and run the drift test: inside the ring, that game ignores it; outside, the game sees movement you didn't make. Also flick each stick and let go, and watch whether the dot comes back to the center.
Why a controller may not show up
- Press a button first. Browsers hide controllers from a page until you press a button or move a stick while it is open, so sites can't use them to fingerprint you.
- Bluetooth pairing. Pair it in your system's Bluetooth settings. On an Xbox Wireless Controller, hold the Pair button for three seconds until the Xbox button flashes; on a DualSense, hold Create and then the PS button until the light bar blinks. If pairing fails, try a USB cable.
- Steam Input. While Steam is running, its Desktop Configuration, the controller bindings Steam uses outside games, can make buttons move the mouse or type as well. If buttons act strangely or the controller doesn't appear, close Steam completely and press a button here again.
- Browser support. Chrome, Edge, Firefox, Opera and Safari support controllers on computers, Chrome and Firefox on Android, and Safari on iPhone and iPad. On Windows, Chrome and Edge name Xbox controllers connected by USB, and many Xbox-compatible controllers, "Xbox 360 Controller (XInput STANDARD GAMEPAD)"; other controllers, including Xbox controllers over Bluetooth, show their own name.
- Controller modes. Many 8BitDo controllers have several modes, such as X-input, D-input, macOS and Switch. If the buttons are mixed up or the controller isn't found, try another mode as its manual describes.
- Windows 11. Pressing the Xbox button opens the Controller bar, which can cover the browser window.
Sources, checked 20 November 2026: W3C, Gamepad (standard layout, controllers hidden until a gamepad user gesture to mitigate fingerprinting); MDN, Using the Gamepad API, gamepadconnected event, GamepadHapticActuator: playEffect(), Gamepad: vibrationActuator and requestAnimationFrame(), with their browser compatibility data; Microsoft Learn, Getting Started With XInput (dead zones); Microsoft, How to connect an Xbox controller to a PC; PlayStation Support, How to use DualSense wireless controllers with PC, Mac and mobile devices; Valve, Steam Input: getting started for players; 8BitDo, SN30 Pro+ FAQ; Chromium source, gamepad_provider.cc (about 250 reads a second) and wgi_data_fetcher_win.cc with gamepad_id_list.cc (controller names on Windows).
Your controller input stays in your browser
The tester reads your controller only inside this tab. Presses, stick values and test results are never uploaded or saved, and reloading the page clears them. Only your dead zone setting and your Animations and theme choice are remembered, in this browser.
Frequently asked questions
Why doesn't my controller show up?
Press a button or move a stick while this page is open: browsers hide controllers from a page until then, so sites can't use them to fingerprint you. If it still doesn't appear, check that it is paired or plugged in, close Steam if it is running, and try another cable, USB port or browser.
How can I tell if my controller has stick drift?
Let go of both sticks, run the drift test and compare the max offset with the dead zone of the game you play. Sticks rarely rest at exactly zero, which is why games ignore a small dead zone around the center. Drift becomes a problem when the offset is bigger than that dead zone, so the game moves without you.
Why can't I test vibration?
Vibration from a web page works in Chrome, Edge and other Chromium browsers and in Safari 16.4 or later on a Mac. Firefox only has an older method that it plans to remove, which this page tries, and Safari on iPhone and iPad has none. Even in a supported browser, some controllers and systems don't pass vibration on.
Can I test a controller on my phone?
Yes. On Android, pair the controller in your Bluetooth settings, or plug it in if your phone supports USB controllers, then open this page in Chrome and press a button. Safari on iPhone and iPad shows controllers too, but can't make them vibrate.
Can this gamepad tester measure input lag or polling rate?
No. This page reads the controller once per frame of your screen, for example 60 times a second on a 60 Hz screen, so it can't see faster updates or time the delay between your press and the screen. The browser also reads controllers at its own pace: Chrome checks them about 250 times a second, so a web page in Chrome never gets new values more often than that. Page reads per second only shows how often this page checks, not your controller's polling rate.
More free tools
Advertisement